White with Italian Marble T3 Chips

White with Italian Marble T3 Chips

Bharat Floorings and Tiles

Price Available on Request

manufacturer

Description

FIXING & POLISHING TERRAZZO TILES ART DECO RANGE The appearance and life of your floor depends not only on the excellent quality of our tiles, but also on the quality of fixing and polishing. We suggest that you do the fixing and polishing through a contractor recommended by us. In case you already have your own contractor, we give below information which, if followed properly, will ensure a dust free, level and smooth and polished floor. Our experience is that, despite these instructions, many contractors tend to cut corners especially on polishing which determines the final effect of the floor. In case you are not using a contractor recommended by Bharat, there will be an extra charge for demonstrating the correct technique or redoing the polishing as we will have to get our authorised contractors to do this. 1. Joints are a vital part of the floor. Always buy the grouting mixture only us along with the tiles. Use within 30 days of despatch to you. Close bags/containers tightly between uses. 2. You may require the same tile in future. Always keep a sample of the tile for re-ordering. 3. The area on which the tiles are to be fixed should be level. 4. Fix tiles in an average 2.5cm to 4cm Sand Cement bed mortar ratio not leaner that 7:1 with a neat cement slurry on top. For better results we recommend a slurry of white cement for premium white based tiles. At the time of laying itself ensure that there is negligible variation in the level of tiles. 5. Next day and not later the joints are to be filled with a slurry of the Grouting mixture. Joints should be properly cleaned before filling the same. 6. The tiles should be polished with an Italian polishing machine a week after laying. The first coat of polishing is the most important one. It is the cutting / levelling coat and should be done using No.0 polishing stones (SuriPolex or CumiSynthetic stone). Due care should be taken for polishing the joints thoroughly. 7. After 1st coat of polishing tiny pinholes will occur, which should be thoroughly grouted using our grout-mix to match the colour on the tiles. Grouting is to be left for 2 days and cured with water before the tiles are subjected to the second coat of polishing using No.1 stone, followed by Nos. 2, and 3 stone (SuriPolex or CumiSynthetic stone). Ensure floor is washed with water between each polishing. Polish the grooves of the tiles by hand to remove any efflorescence.


Specification

    Similar Product

    4168 Products

    • PLANK OAK SILVER

      PLANK OAK SILVER

      OrientBell

      add
    • Ultra Parables

      Ultra Parables

      Sunheart

      add
    • Cloudy Be

      Cloudy Be

      RAK Ceramics

      add
    • Vento White

      Vento White

      RAK Ceramics

      add
    • Concreto Dark Grey

      Concreto Dark Grey

      RAK Ceramics

      add
    • Surfaces Brown

      Surfaces Brown

      RAK Ceramics

      add
    • Sh 501

      Sh 501

      Sunheart

      add
    • Volga Lem

      Volga Lem

      RAK Ceramics

      add
    • Zara Floor Ivory FL

      Zara Floor Ivory FL

      OrientBell

      add
    • PDC Keris

      PDC Keris

      OrientBell

      add
    • Cloudy Blanco

      Cloudy Blanco

      Sunheart

      add
    • Ribbed Ivory

      Ribbed Ivory

      OrientBell

      add

    Get the latest products and offers!

    Don't miss out on the latest brand and product launches and offers.

    Footer Newsletter