Great White Electricals
Price Available on Request
Touch sensitive, glass interface (white & black). • Comply to DALI standard protocol IEC 62386 209 • Built in 100mA DALI power supply to power up to max. 50 DALI ECGs. • Powered by DALI bus while not connected to AC mains. • Max. 100 DALI ECGs on a DALI line can be controlled by 4 control panels via broadcast (2 by AC mains, 2 by DALI bus). • Enable to control 4 DALI Groups and 4 DALI Scenes. • Enable to set start DALI group number (0 15) and scene number (0 15) by rotary switches on the back. • Support DT8 devices, color temperature adjustment according to DALI specifications of Device Type 8, Color Type Tc. • Each DT8 device is controlled via a single DALI address OPERATION 1. Set starting Group number via rotary switch on the back: (0 15 selectable) • This DALI touch panel controller enables dimming commands and DT8 commands to be sent to 4 Groups of devices on the DALI circuit. A rotary switch on the back is used to select Groups you would like to control and set the starting Group number, and total 16 Groups (0 15) can be selected. • When the rotary switch arrow position is at 0, button 1 controls all DALI devices on the circuit via broadcast, button 2 controls DALI Group 0, button 3 controls Group 1, and button 4 controls Group 2. • When the rotary switch arrow position is at X except 0 (1 C), button 1 controls DALI Group X 1, button 2 controls Group X, button 3 controls Group X+1, and button 4 controls Group X+2. • When the rotary switch arrow position is at D, button 1 controls devices in DALI Group 12, button 2 controls devices in DALI Group 13, button 3 controls devices in DALI Group 14, and button 4 controls all devices through broadcast. • When the rotary switch arrow position is at E, button 1 controls devices in DALI Group 13, button 2 controls devices in DALI Group 14, button 3 controls all devices through broadcast, button 4 controls devices in DALI Group 0. • When the rotary switch arrow position is at F, button 1 controls devices in DALI Group 14, button 2 controls all devices through broadcast, button 3 controls devices in DALI Group 0, button 4 controls DALI group 1. Note: all DALI slaves on the circuit shall be assigned to one or more DALI groups by DALI master first. Please refer to the detailed Group setting table as follows: 2. Set starting Scene number via rotary switch on the back: (0 15 selectable) • This DALI touch panel controller enables Scene selection commands for up to 4 Scenes to be sent to the DALI circuit. A rotary switch on the back is used to select Scenes you would like to control and set the starting scene number, and total 16 Scenes (0 15) can be selected. • When the rotary switch arrow position is at X (0 15), Scene button S1 controls Scene X, S2 controls Scene X+1, S3 controls Scene X+2, and S4 controls Scene X+3.
103 Products